Latest beta image:
Although this image is still in beta stage, all installed programs are fully supported with upgrades and security patches for several years.
- Supports Pi 4, Pi 3 and Pi 2 (Pi 1 and Pi zero no longer supported)
- Based on latest Raspbian Buster
- Contains FreePBX 15.0.16.19 and Asterisk 16.5.0
| Torrent | raspbx-06-10-2019.zip.torrent |
| HTTP | raspbx-06-10-2019.zip |
| SHA-1 | a1e19a5c988e19ce85104d22b57621d1e95c1f06 |
An 8GB card or larger is recommended.
Note: In case the “Apply Config” button takes very long or never completes, set “Enable Module Signature Checking” to no in advanced settings.
Upgrades:
Once your RasPBX has successfully booted, run this command on the console to install the latest additions and improvements:
raspbx-upgrade
SSH login:
user: root
password: raspberry
You can easily install Asterisk 13:
http://www.raspberry-asterisk.org/faq/#asterisk13
I’m not yet shipping Asterisk 13 by default because there is no chan_dongle patch available yet. (Please let me know when it becomes available). But you can always easily switch over, Asterisk 13 is fully supported with updates.
It seems simple and yet ….
first edit properly /etc/network/interfaces
then turn off the DHCP client
nano /etc/dhcpcd.conf
Add this to the end of the file (edit your IP and router gateway address):
interface eth0
static ip_address=192.168.1.10/24
static routers=192.168.1.1
static domain_name_servers=208.67.222.222
Sorry I just saw now ….